PLC221镏程测定仪

一、用途及适用范围
本仪器是根据中华人民共和国标准GB/T6536《石油产品蒸馏测定法》规定的要求设计制造的，适用于按GB/T6536的标准对汽油、航空汽油、喷气燃料、特殊沸点的溶剂、石脑油、柴油、馏分燃料和相似的石油产品的蒸馏测定。
二、主要技术参数及技术特点
（一）主要技术参数
⑴ 工作电源：    AC220V±10%，50Hz。
⑵ 电炉加热功率：1000W。
⑶ 量筒容积：    100毫升，分度1毫升。
⑷ 蒸馏烧瓶：    125mL，符合GB/T6536的要求。
⑸ 温度计：      全浸棒式，刻度范围分别(-2～+300)℃和(-2～+400)℃两种，分度为1℃。
⑹ 电炉活动板：  碳化硅板制造，孔径分别为φ38㎜、φ50㎜。
⑺ 温控仪:       ① 控温范围： 室温～90℃任意设置。
② 控温精度：  ±0.5℃。
③ 温度显示方式： LED数字显示。
⑻ 浴槽加热功率：1800W
⑼环境温度：    ≤+30℃。
⑽相对湿度：    ≤85%。
⑾ 整机功耗:     不大于3000W。

PLC221 determination of distillation range tester

A, application and applicable scope

The instrument is according to the regulations of the people's Republic of China standard GB/T6536 "petroleum products Determination of distillation method" the requirements of design and manufacture, is suitable for the determination of distillation according to the criteria of GB/T6536 for gasoline, aviation gasoline, jet fuel, special the boiling point of the solvent naphtha, distillate fuel, diesel, and similar petroleum products.

Two, main technical parameters and technical features

(a) the main technical parameters

The working power supply: AC220V + 10%, 50Hz.

The electric heating power: 1000W.

The cylinder volume: 100 ml, 1 ml of indexing.

The distillation flask: 125mL, meet the requirements of GB/T6536.

The thermometer: Immersion rod type, scale range respectively (-2 ~ +300) C and (-2 ~ +400) C two, dividing 1 C.

When a "furnace activity board: silicon carbide board manufacturing, aperture respectively Phi 38 mm, 50 mm in diameter.

Water temperature controller: temperature range: room temperature to 90 DEG C arbitrarily set.

The temperature control precision is + - 0.5 deg.

The temperature display: LED digital display.

Therefore the bath heating power: 1800W

Only the temperature of the environment: less than +30 DEG C.

That relative humidity is less than or equal to 85%.