高温高剪切粘度测定仪参照SH/T0703、ASTM D5481标准设计和生产，用于测定机油在高温高剪切条件下的粘度值。在150℃的恒温条件下，注射管内的油样通过连接注射管的气泵实现进样和标量，并在0.5-3.5MPa的惰性气体压力下流经0.15mm内径的毛细管，以模拟高温高剪切的实际应用场景。实验自动记录时长和实验稳定气压，并自动计算待测油样的高温高剪切粘度值。
5、仪器采用单管检测，方便快捷
PGWGJ0703 automatic high temperature high shear viscosity meter
Detection principle:
High temperature high shear viscosity meter (SH/T0703, ASTM D5481 standard design and production, is used to measure the oil under the condition of high temperature and high shear viscosity values.At 150 ℃ under the condition of constant temperature, the injection tube sample injection by connecting tube of the pump to achieve sampling and scalar, and 0.5 3.5 MPa in inert gas under pressure through the 0.15 mm diameter of capillary, to simulate the practical application of high temperature and high shear.Experiments for the automatic recording time and stable air pressure, and automatically calculate the high temperature high shear viscosity of the sample under test values.
Technical parameters:
Test standard: SH/T0703, ASTM D5481
Power supply: 220 v, 50 hz
Temperature control: aluminum bath temperature
Temperature control range: experiment: 150 + 0.1 ℃
Viscosity pool number: 1 tube
Capillary inner diameter: 0.15 mm
The effective length of capillary: 16 to 18 mm
Pressure range: 0.5 to 3.5 MPa
Automatic detection, automatic printing results
The main features
1, the instrument for domestic initiative, no moving parts, low failure rate, low maintenance cost
2, using special software, automatic test results;
3, glass capillary conform to the requirements of the standard, diameter of 0.15 mm, 16 mm long;
4, in the research for the purpose of users can set different shear rate and test temperature;
5, instrument using single tube detection, convenient and quick
